W-7 Socket Clevis Thimble Eye

    As an important connection hardware in power grid construction, W type socket hanging plate is mainly used to connect suspension clamp and insulator string, and plays a role in connecting conductor and insulation with other accessories. According to the fault analysis of major domestic transmission lines, the breakdown of transmission lines is mainly due to the wear and fracture of power fittings to varying degrees. Therefore, strength analysis and structural improvement and optimization of power fittings are required. Iron, aluminum or copper products and other metal components widely used in transmission lines are collectively referred to as power fittings. Most of the fittings need to bear a large tension during operation, while protecting good electrical contact, so good quality, correct selection and correct installation of fittings play a vital role in safe operation of transmission lines.        W  type socket hanging plate is used to connect the steel foot at the lower end of the ball and socket insulator, also known as the ball head. The socket hanging plate can be divided into single socket hanging plate and double socket hanging plate according to different structures and application conditions. When the single suspension insulator string is connected with the suspension clamp, the shorter single socket hanging plate should be selected to reduce the length of the insulator string. When a single tension insulator string is connected to the tension clamp, a long single socket hanging plate shall be used to avoid the jumper of the tension clamp from colliding with the insulator porcelain skirt. If the long single socket hanging plate cannot meet the requirements, a short single socket hanging plate shall be used, and then a hanging plate shall be installed to extend the distance. The actual effect of single socket clevis is the bending condition of the main slot type connecting bolt. There are two structural types of the socket ball of the double socket clevis. The W lock pin structure mode is used below the 16T level, and the R lock pin structure mode is used for the 20T level and above.        In the transmission line, the socket hanging plate plays the role of suspension insulator string and suspension clamp, and bears large working stress. Its safety performance is crucial to the transmission line.

Power Accessories Steel Bow Stay Rod

Introducing Stay Rod — the essential tension control solution for overhead transmission and distribution line construction. Engineered to deliver uncompromising strength and precision, our Stay Rod ensures the secure anchoring of utility poles, towers, and dead-end structures, even under extreme mechanical loads and environmental stress. Key Features & Benefits: Ultra-High Tensile Strength: Forged from hot-dip galvanized high-tensile steel (Grade 8.8+) to withstand loads exceeding 10 tons, resisting deformation under continuous tension. Corrosion Resistance: Triple-layer protection (galvanization + epoxy coating + sealant) defends against rust, UV degradation, and harsh chemicals for 20+ years of service life. Safety-Integrated Design: Precisely machined threads with anti-unthreading grooves prevent accidental disassembly during vibration or load shifts. Quick-Install System: Color-coded turnbuckles and pre-assembled clevis ends reduce installation time by 40% vs. traditional methods. Adaptive Compatibility: Interchangeable with IEC, ANSI, and GB standard hardware (fittings for eye-bolts, strain clamps, and anchor plates included).

Eye Bolt Pigtail Bolt

Product Description Product model: ODM or OEM I. Overview This product is a customized link accessory designed to meet the specific needs and specifications of customers. Its design is flexible and diverse, suitable for industrial scenarios. This product can be selected in either the Original Design and Manufacturing (ODM) mode or the Original Equipment Manufacturer (OEM) mode, providing customers with a one-stop solution. Ii. Color and Appearance The product color adopts a combination of silver and White, namely "Siver White". This combination not only appears simple and elegant but also retains a modern and technological feel. The appearance design of the product has been meticulously crafted, with smooth lines and a compact structure, making it both aesthetically pleasing and practical. Iii. Dimensions and Specifications The product size is 6*180mm. The specific size can be customized according to customer requirements. Due to its modular design, this product can adapt to different installation environments and space requirements, meeting the needs of various customers. Iv. Materials and Properties This product is made of carbon steel and has undergone precise processing and heat treatment, featuring excellent strength and wear resistance. Carbon steel materials have high hardness and corrosion resistance, enabling the product to maintain stable performance in various environments. In addition, the product surface has undergone special treatment, featuring excellent anti-rust and anti-corrosion properties, which extends the product's service life. V. Application Scenarios Due to its universality and customizability, it is widely used in industrial manufacturing, mechanical equipment, electronic products and other fields. Vi. Advantages and Characteristics 1. Customization: Customized according to customer requirements to meet different needs and specifications. 2. Excellent material: Made of carbon steel, it features good strength and wear resistance. 3. Wide application range: It is suitable for various application scenarios, including industrial manufacturing, mechanical equipment, electronic products, household goods, etc. 4. Flexible and versatile: With a modular design, it can adapt to different installation environments and space requirements. 5. Quality Assurance: The products undergo strict quality control and testing to ensure their performance and quality.

DT Series Copper Bimetal Cable Lug for Electrical Terminal Connector