NEWS


Provide professional electrical equipment solutions

Avoiding Wire Scratches in Production of Steel-reinforced Aluminum Strand

2024-05-22


Steel core aluminum stranded wire is made of aluminum wire and steel wire stranded, suitable for overhead transmission lines. Specifications and models of ACSR: GB1179-83 GB1179-1999 LJ JL aluminum strand LGJ JL/G1A/JL/G2A/JL/G1B/JL/G2B/JL/G3A ACSR.

Steel core aluminum stranded wire is made of aluminum wire and steel wire stranded, suitable for overhead transmission lines. Specifications and models of ACSR: GB1179-83 GB1179-1999 LJ JL aluminum strand LGJ JL/G1A/JL/G2A/JL/G1B/JL/G2B/JL/G3A ACSR.
First from the conductor itself to consider:

First, it is guaranteed that the raw material of ACSR-aluminum rod cannot be affected with moisture. The aluminum rod is affected with moisture, which causes aluminum chips in the working area of the wire drawing die hole to stay, and lubricating oil cannot all enter the working area, thus causing the pulled aluminum wire to be unround and unsmooth.

Second, the drawing oil should be clean and free of moisture. Because in the drawing process, the drawing oil is in a high temperature state when it enters the working area from the lubrication area. If it contains a certain amount of moisture, the lubricating oil will be diluted and the lubrication effect will be greatly reduced, resulting in wire scratches and aluminum wire breakage.

Secondly, from the production considerations, should pay attention to the following issues:

In wire drawing process:

(1) Check whether the die of the wire drawing machine is placed accurately.

(2) Check whether the wire drawing drum wheel is grooved after friction and whether there is line pressing phenomenon;

(3) Check whether the surface finish of the lubrication area of the wire drawing die meets the requirements and whether there is any blockage of aluminum chips.

In the stranding process:

(1) Check the sensitive rotation of the wire reel center;

(2) Check whether the tension of the coil is uniform;

(3) Check whether the single line is slightly pressed or uneven;

(4) Check whether the single wire is in the groove of the guide wheel when twisting.

Key words:

Power fittings

Power equipment

RELATED INFORMATION


What are the types of iron accessories for power lines?

The installation of iron accessories should meet the requirements of relevant standards and specifications to avoid power system failure caused by improper installation; the service life of iron accessories is limited, and regular inspection, maintenance and replacement should be carried out to ensure the long-term use effect of iron accessories. What are the types of power iron accessories? Which kinds of power fittings manufacturers wholesale?

2024-05-22

How to choose anchor bolts for power fittings tower? What are the manufacturer's suggestions

The material of anchor bolts shall comply with relevant standards and regulations. Common materials include 8.8 grade and 10.9 grade, and 12.9 grade with higher strength. In the design, the material types of anchor bolts shall be minimized. The same material shall be used for anchor bolts of the same specification in the same project, and the same specification shall be used for anchor bolts of the same foundation tower. How to choose the anchor bolts for the power fittings tower?

2024-05-22

What is the main difference between power iron accessories and power fittings

Power iron accessories are usually made of iron or iron alloys, so they are called "power iron accessories". These accessories usually have high strength and durability and are suitable for power transmission lines, cable lines, etc. Power fittings can be made of different materials and are all used as accessories in the power system. What is the difference between power iron accessories and power gold?

2024-05-22

Get Quote